A: Before you start, make sure all devices are connected under the same WIFI. 

Note: This is applicable for those subscription plans with additional device connection or under unexpired premium trial. 

1. Convert your main device from Stand-Alone to Control Device.

      Go to Setting ->This Device ->tap "Switch to Control Station.

2. On your Controller now, must take note of the IP address.

  • Display IP address in : Setting -> This Device -> "Configuration Mode"


3. On Additional Device (ordering device/kitchen display)

  • Reset the device if you have not done so (Setting ->This Device ->select Reser/Restore Data on dropdown menu located at the upper right.
  • Open FoodZap and TAP "I'M AN EXISTING USER"



  • On the "Operation Mode" page, tap on "Additional Device".



  • Scan or Enter the Controller IP address (Refer to step 1 above) to establish connection


             Tap "Scan" to search the Controller 

           Once Controller is detected tap OK


4. On Controller

  • Tap "Grant" in the pop-up Client Request dialog



5. On Client Device

  • Tap "Download". After the menu is 100% synchronised, tap "Restart Now!".




       Now you are ready to go with your group of connected devices !  

Tips on how to make mobile ordering stable & reliable